Tips to Mount a Computer Monitor to the Wall

One of the most appealing aspects of the modern computer monitors is the fact that they can be installed to a wall, and being able to clear off a desk can allow the space to be used for other purposes. No matter where a person would like to mount their computer monitor, it is important to follow several tips to ensure that the installation is completed in a safe and secure manner. While many consumers are afraid to utilize the wall mount that comes with so many different monitors these days, the simple fact of the matter is that virtually any surface can easily handle the relatively light weight. As long as everything is performed with care, there truly is nothing to worry about.

Many individuals pick their desired installation spot without actually measuring to ensure that the location will be acceptable. A user needs to understand that there must be some type of arrangements made to accommodate the power cord and cables, and nothing is worse than installing a computer monitor in a place where it will not allow the cords to reach. The actual CPU should be placed exactly where it will be after the monitor is installed, and only this method will give an exact answer as to whether the location will be suitable or not. A consumer also needs to determine what type of surface they are going to be mounting their computer to, and this will help decide if any special brackets or additional equipment is necessary.

Every effort should be made to allow the computer monitor to be mounted in a location that will support the weight, and the best method is to drill directly into the studs behind the sheet rock. However, there are many other materials that a wall could consist of that will alter the installation slightly. Concrete walls, for example, only need screws that are designed to be self tapping in a hard surface. The bracket that comes with the computer monitor will accommodate these concrete screws and allow the job to be performed very easily. Wood paneled walls may not have the same type of supports behind the surface, and these will often require larger screws to be placed in multiple areas. Consumers must take special care to avoid drilling into any walls in which the inner components cannot be located, and avoiding the wires is absolutely necessary.

Individuals that do not wish to see any type of cords hanging down may wish to drill a hole in the base of their wall and run the wires inside. It is important to note that this type of installation is certainly designed for more permanent placements, and it can be tough to patch multiple holes if any mistakes are made. After the mount is securely fastened to the wall, it is always a good idea to test the strength of the bracket. Consumers should never place a computer monitor on the bracket until they are sure that it is ready to support the weight. After making sure that the mount is completely level, an individual can carefully place the computer monitor onto the bracket.

Mounting a computer monitor to a wall is not a difficult task, but it is certainly something that must be done very systematically and carefully. As long as enough time is spent planning out the install, there should be no major issues that will arise. It is always helpful to have a spare set of hands as consumers should never try to lift the computer monitor onto the mount without adequate assistance. Any specific questions as to what a mount can handle should be directed to the manufacturer, and it is necessary to understand that only some computer monitors are designed to be wall mounted. If the back of the monitor has any type of problem with overheating, it is not a good idea to attempt to install it on a wall.